點擊圖片查看大圖SABIC? POM 140S 高溶脂POM 高精密件POM
SABIC? POM 140S is an easy flowing grade suitable for injection molding applications for precision molded parts and thinwalled molded parts require high rigidity.
SABIC?POM 140S是一種易于流動的等級，適用于精密模塑件的注射成型應用，而薄壁模塑件要求高剛性。
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS | |
|---|---|---|---|---|
| PHYSICAL PROPERTIES | 1) | |||
| Density | 1410 | kg/m3 | ISO 1183 | |
| Melt volume rate (MVR) | 12 | cm3/10 min | ISO 1133 | |
| Mold shrinkage - parallel | 2 | % | ISO 294-4 | |
| Mold shrinkage - normal | 1.8 | % | ISO 294-4 | |
| Water absorption (23°C-sat) | 0.65 | % | ISO 62 | |
| MECHANICAL PROPERTIES | 1) | |||
| Tensile modulus (1mm/min) | 2900 | MPa | ISO 527-2 1A | |
| Tensile stress at yield (50mm/min) | 65 | MPa | ISO 527-2 1A | |
| Tensile strain at yield (50mm/min) | 9 | % | ISO 527-2 1A | |
| Nominal strain at break (50mm/min) | 25 | % | ISO 527-2 1A | |
| Tensile creep modulus (1h) | 2500 | MPa | ISO 899-1 | |
| Tensile creep modulus (1000h) | 1300 | MPa | ISO 899-1 | |
| Flexural modulus (23°C) | 2800 | MPa | ISO 178 | |
| Charpy impact strength @ 23°C | 150 | kJ/m2 | ISO 179/1eU | |
| Charpy impact strength @ -30°C | 140 | kJ/m2 | ISO 179/1eU | |
| Charpy notched impact strength @ 23°C | 6.5 | kJ/m2 | ISO 179/1eA | |
| Charpy notched impact strength @ -30°C | 6 | kJ/m2 | ISO 179/1eA | |
| THERMAL PROPERTIES | 1) | |||
| Flammability Rating, UL 94 | ||||
| @ 1.5mm and 3mm thickness | HB | Class | UL Tested | |
| Coeff.of linear therm. expansion (parallel) | 1.1 | E-4/°C | ISO 11359-2 | |
| Melting temperature (10 °C/min) | 166 | °C | ISO 11357-1/-3 | |
| Deflection temperature under load DTUL (@1.8 MPa) | 106 | °C | ISO 75-1&2 |
免責聲明：（1）以上所展示的信息由企業自行提供，內容的真實性、準確性和合法性由發布企業負責，環球塑化網對此不承擔任何保證責任。我們原則上建議您優先選擇“塑企通”會員合作! （2）同時我們鄭重提醒各位買/賣家，交易前請?jiān)敿?xì)核實對方身份，切勿隨意打款或發貨，謹防上當受騙。如發現虛假信息，請向環球塑化網舉報。
簡繁切換