產品分類
聯系同豐
|
|
Rynite 530HTE NC010 電器產品 骨架產品
產品型號: |
|
產品規格: |
25kg |
產品品牌: |
|
Rynite?530HTE NC010是一種30%玻璃纖維增強改性聚對二甲酸乙二醇酯樹脂,具有優異的高溫介電性能。
Rynite® 530HTE NC010
THERMOPLASTIC POLYESTER RESIN
PET-GF30
CHARACTERISTICS
Processing
Injection Molding
Special characteristics
Heat stabilized or stable to heat
PRODUCT TEXT
Common features of Rynite® thermoplastic polyester include mechanical and physical properties such as excellent balance of strength and stiffness, dimensional stability, creep resistance, heat resistance, high surface gloss and good inherent electrical properties at elevated temperature. It can be processed over a broad temperature range and has excellent flow properties.
Rynite® thermoplastic polyester resins are typically used in demanding applications in the automotive, electrical and electronics, appliances where they successfully replace metals and thermosets, as well as other thermoplastic polymers.
Rynite® 530HTE NC010 is a 30% glass reinforced modified polyethylene terephthalate resin with excellent high temperature dielectric properties.
PRODUCT INFORMATION
Resin Identification
PET-GF30
ISO 1043
Part Marking Code
>PET-GF30<
ISO 11469
RHEOLOGICAL PROPERTIES
Melt mass-flow rate
9
g/10min
ISO 1133
Melt mass-flow rate, Temperature
280
°C
ISO 1133
Melt mass-flow rate, Load
2.16
kg
ISO 1133
Molding shrinkage, parallel
0.1
%
ISO 294-4, 2577
Molding shrinkage, normal
0.6
%
ISO 294-4, 2577
MECHANICAL PROPERTIES
Tensile Modulus
11000
MPa
ISO 527-1/-2
Stress at break
170
MPa
ISO 527-1/-2
Strain at break
2.3
%
ISO 527-1/-2
THERMAL PROPERTIES
Melting temperature, 18°F/min
252
°C
ISO 11357-1/-3
Coeff. of linear therm. expansion, parallel
21
E-6/K
ISO 11359-1/-2
Coeff. of linear therm. expansion, normal
63
E-6/K
ISO 11359-1/-2
Coeff. of linear therm. expansion, Normal, -40-23°C
56
E-6/K
ISO 11359-1/-2
Coeff. of linear therm. expansion, Normal, 55-160°C
112
E-6/K
ISO 11359-1/-2
Coeff. of linear therm. expansion, Parallel, -40-23°C
21
E-6/K
ISO 11359-1/-2
Coeff. of linear therm. expansion, Parallel, 55-160°C
18
E-6/K
ISO 11359-1/-2
Thermal conductivity of melt
0.29
W/(m K)
-
Spec. heat capacity of melt
1500
J/(kg K)
-
RTI, electrical, 30mil
140
°C
UL 746B
RTI, electrical, 60mil
140
°C
UL 746B
RTI, electrical, 120mil
140
°C
UL 746B
RTI, impact, 30mil
140
°C
UL 746B
RTI, impact, 60mil
140
°C
UL 746B
RTI, impact, 120mil
140
°C
UL 746B
RTI, strength, 30mil
140
°C
UL 746B
RTI, strength, 60mil
140
°C
UL 746B
RTI, strength, 120mil
140
°C
UL 746B
FLAMMABILITY
Burning Behav. at thickness h
HB
class
IEC 60695-11-10
Thickness tested
0.85
mm
IEC 60695-11-10
UL recognition
yes
-
UL 94
Glow Wire Flammability Index, 120mil
800
°C
IEC 60695-2-12
Glow Wire Ignition Temperature, 120mil
800
°C
IEC 60695-2-13
FMVSS Class
B
-
ISO 3795 (FMVSS 302)
Burning rate, Thickness 1 mm
36
mm/min
ISO 3795 (FMVSS 302)
ELECTRICAL PROPERTIES
Relative permittivity, 100Hz
4.2
-
IEC 62631-2-1
Relative permittivity, 1MHz
3.9
-
IEC 62631-2-1
Dissipation factor, 100Hz
14
E-4
IEC 62631-2-1
Dissipation factor, 1MHz
146
E-4
IEC 62631-2-1
Volume resistivity
>1E13
Ohm*m
IEC 62631-3-1
Surface resistivity
1E14
Ohm
IEC 62631-3-2
Electric strength
38
kV/mm
IEC 60243-1
Comparative tracking index
200
-
IEC 60112
OTHER PROPERTIES
Density
1560
kg/m3
ISO 1183
Density of melt
1360
kg/m3
-
INJECTION
Drying Temperature
120
°C
Drying Time, Dehumidified Dryer
4 - 6
h
Processing Moisture Content
≤0.021
%
Melt Temperature Optimum
285
°C
Min. melt temperature
280
°C
Max. melt temperature
300
°C
Max. screw tangential speed
0.2
m/s
Mold Temperature Optimum
140
°C
Min. mold temperature
120
°C
Max. mold temperature
1402
°C
Hold pressure range
≥80
MPa
Hold pressure time
4
s/mm
Back pressure
As low as possible
MPa
Ejection temperature
170
°C
1: At levels above 0.02%, strength and toughness will decrease, even though parts may not exhibit surface defects.
2: (6mm - 1mm thickness)
免責聲明:(1)以上所展示的信息由企業自行提供,內容的真實性、準確性和合法性由發布企業負責,環球塑化網對此不承擔任何保證責任。我們?cè)瓌t上建議您優先選擇“塑企通”會員合作! (2)同時我們鄭重提醒各位買/賣家,交易前請?jiān)敿?xì)核實對方身份,切勿隨意打款或發貨,謹防上當受騙。如發現虛假信息,請向環球塑化網舉報。
|