點擊圖片查看大圖Zytel® HTNFR52G45BL BK337
HIGH PERFORMANCE POLYAMIDE RESIN
PA6T/66-GF45 FR(16+72)
CHARACTERISTICS
Regional availability
- Global
Processing
Injection Molding
Delivery form
Pellets
Additives
Lubricants, Release agent, Flame retardant
Special characteristics
Flame retardant
PRODUCT TEXT
Zytel® HTN high performance polyamide resins feature high retention of properties upon exposure to elevated temperature, to high moisture, and to harsh chemical environments. Polymer families and grades of Zytel® HTN are tailored to optimize performance as well as processability.
Typical applications with Zytel® HTN include demanding applications in the automotive, electrical and electronics, domestic appliances, and construction industries.
Zytel® HTNFR52G45BL BK337 is a 45% glass reinforced, flame retardant, lubricated high performance polyamide resin that has been developed for connector applications.
PRODUCT INFORMATION
DRY/COND.
TEST NORM
Resin Identification
PA6T/66-GF45FR(16+72)
ISO 1043
Part Marking Code
>PA6T/66-GF45FR(16+72)<
ISO 11469
Part Marking Code
>PPA-GF45FR<
SAE J1344
ISO designation
ISO 16396-PA6T/66,GF45 FR(16+72),M1CF1GR,S10-160
-
RHEOLOGICAL PROPERTIES
DRY/COND.
UNIT
TEST NORM
Molding shrinkage, parallel
0.2/-
%
ISO 294-4, 2577
Molding shrinkage, normal
0.6/-
%
ISO 294-4, 2577
MECHANICAL PROPERTIES
DRY/COND.
UNIT
TEST NORM
Tensile Modulus
17000/17000
MPa
ISO 527-1/-2
Stress at break
175/155
MPa
ISO 527-1/-2
Strain at break
1.3/1.5
%
ISO 527-1/-2
Flexural Modulus
15200/15200
MPa
ISO 178
Flexural Strength
290/260
MPa
ISO 178
Charpy impact strength, 73°F
42/36
kJ/m2
ISO 179/1eU
Charpy impact strength, -22°F
40/36
kJ/m2
ISO 179/1eU
Charpy notched impact strength, 73°F
13/-
kJ/m2
ISO 179/1eA
Charpy notched impact strength, -40°F
13/-
kJ/m2
ISO 179/1eA
Izod notched impact strength, 73°F
12/-
kJ/m2
ISO 180/1A
Poisson's ratio
0.33/0.33
-
-
THERMAL PROPERTIES
DRY/COND.
UNIT
TEST NORM
Melting temperature, first heat
310/*
°C
ISO 11357-1/-3
Temp. of deflection under load, 260 psi
284/*
°C
ISO 75-1/-2
Temp. of deflection under load, 65 psi
300/*
°C
ISO 75-1/-2
Coeff. of linear therm. expansion, parallel
15/*
E-6/K
ISO 11359-1/-2
Coeff. of linear therm. expansion, normal
50/*
E-6/K
ISO 11359-1/-2
Coeff. of linear therm. expansion, Normal, -40-23°C
50/*
E-6/K
ISO 11359-1/-2
Coeff. of linear therm. expansion, Normal, 55-160°C
75/*
E-6/K
ISO 11359-1/-2
Coeff. of linear therm. expansion, Parallel, -40-23°C
15/*
E-6/K
ISO 11359-1/-2
Coeff. of linear therm. expansion, Parallel, 55-160°C
8/*
E-6/K
ISO 11359-1/-2
RTI, electrical, 30mil
140
°C
UL 746B
RTI, electrical, 60mil
140
°C
UL 746B
RTI, electrical, 120mil
140
°C
UL 746B
RTI, impact, 30mil
120
°C
UL 746B
RTI, impact, 60mil
120
°C
UL 746B
RTI, impact, 120mil
120
°C
UL 746B
RTI, strength, 30mil
120
°C
UL 746B
RTI, strength, 60mil
120/*
°C
UL 746B
RTI, strength, 120mil
130
°C
UL 746B
FLAMMABILITY
DRY/COND.
UNIT
TEST NORM
Burning Behav. at 60mil nom. thickn.
V-0/*
class
IEC 60695-11-10
Thickness tested
1.5/*
mm
IEC 60695-11-10
UL recognition
yes/*
-
UL 94
Burning Behav. at thickness h
V-0/*
class
IEC 60695-11-10
Thickness tested
0.75/*
mm
IEC 60695-11-10
UL recognition
yes/*
-
UL 94
Oxygen index
49/*
%
ISO 4589-1/-2
Glow Wire Flammability Index, 40mil
960/-
°C
IEC 60695-2-12
Glow Wire Ignition Temperature, 40mil
900/-
°C
IEC 60695-2-13
Glow Wire Temperature, No Flame, 40mil
875/-
°C
IEC 60335-1
Glow Wire Temperature, No Flame, 60mil
875/-
°C
IEC 60335-1
Glow Wire Temperature, No Flame, 80mil
875/-
°C
IEC 60335-1
Glow Wire Temperature, No Flame, 120mil
875/-
°C
IEC 60335-1
FMVSS Class
B
-
ISO 3795 (FMVSS 302)
Burning rate, Thickness 1 mm
<80
mm/min
ISO 3795 (FMVSS 302)
ELECTRICAL PROPERTIES
DRY/COND.
UNIT
TEST NORM
Relative permittivity, 100Hz
3.9/-
-
IEC 62631-2-1
Relative permittivity, 1MHz
3.6/-
-
IEC 62631-2-1
Dissipation factor, 100Hz
45/-
E-4
IEC 62631-2-1
Dissipation factor, 1MHz
112/-
E-4
IEC 62631-2-1
Volume resistivity
>1E13/-
Ohm*m
IEC 62631-3-1
Electric strength
31/-
kV/mm
IEC 60243-1
Comparative tracking index
500/-
-
IEC 60112
Dissipation Factor, 1 GHz
110/-
E-4
ASTM D 2520 B
Dissipation Factor, 10 GHz
110/-
E-4
ASTM D 2520 B
OTHER PROPERTIES
DRY/COND.
UNIT
TEST NORM
Density
1760/-
kg/m3
ISO 1183
INJECTION
DRY/COND.
UNIT
Drying Recommended
yes
Drying Temperature
100
°C
Drying Time, Dehumidified Dryer
6 - 8
h
Processing Moisture Content
≤0.1
%
Melt Temperature Optimum
325
°C
Min. melt temperature
320
°C
Max. melt temperature
330
°C
Min. mold temperature
90
°C
Max. mold temperature
110
°C
免責聲明：（1）以上所展示的信息由企業自行提供，內容的真實性、準確性和合法性由發布企業負責，環球塑化網對此不承擔任何保證責任。我們?cè)瓌t上建議您優先選擇“塑企通”會員合作! （2）同時我們鄭重提醒各位買/賣家，交易前請?jiān)敿?xì)核實對方身份，切勿隨意打款或發貨，謹防上當受騙。如發現虛假信息，請向環球塑化網舉報。
簡繁切換