<menu id="uukow"></menu>
<nav id="uukow"><nav id="uukow"></nav></nav>
<nav id="uukow"><strong id="uukow"></strong></nav>
<nav id="uukow"></nav>
<menu id="uukow"><strong id="uukow"></strong></menu>

  • 東莞市廣豐聯泰塑料有限公司

    專供PC+ABS 沙伯基礎PC 德國拜耳PC+ABS 寶理PPS LCP

    產品分類
    聯系方式
    友情鏈接
    您當前的位置：首頁 » 新聞中心 » XENOY PC+PBT 5720U 化學抵抗低溫,紫外線穩定.
    新聞中心
    XENOY PC+PBT 5720U 化學抵抗低溫,紫外線穩定.
    發布時間：2016-04-21        瀏覽次數：288        返回列表

    XENOY ? Resin 5720U

    		SI | British | Metric | PDF Europe-Africa-Middle East: COMMERCIAL

     
    Unfilled PBT+PC alloy. Outstanding low temperature impact/chemical resistance. UV stabilized version of XENOY
     

    Property
     
    TYPICAL PROPERTIES (1)
    MECHANICAL Value Unit Standard
    Tensile Stress, yld, Type I, 50 mm/min 470 kgf/cm2 ASTM D 638
    Tensile Stress, brk, Type I, 50 mm/min 480 kgf/cm2 ASTM D 638
    Tensile Stress, yld, Type I, 5 mm/min 440 kgf/cm2 ASTM D 638
    Tensile Stress, brk, Type I, 5 mm/min 500 kgf/cm2 ASTM D 638
    Tensile Stress, yld, Type I, 10 mm/min 450 kgf/cm2 SABIC - Japan Method
    Tensile Stress, brk, Type I, 10 mm/min 470 kgf/cm2 SABIC - Japan Method
    Tensile Strain, yld, Type I, 50 mm/min 4 % ASTM D 638
    Tensile Strain, brk, Type I, 50 mm/min 116.6 % ASTM D 638
    Tensile Strain, yld, Type I, 5 mm/min 4.6 % ASTM D 638
    Tensile Strain, brk, Type I, 5 mm/min 122.4 % ASTM D 638
    Tensile Strain, yld, Type I, 10 mm/min 4.6 % SABIC - Japan Method
    Tensile Strain, brk, Type I, 10 mm/min 109.5 % SABIC - Japan Method
    Tensile Modulus, 50 mm/min 18500 kgf/cm2 ASTM D 638
    Tensile Modulus, 5 mm/min 18600 kgf/cm2 ASTM D 638
    Tensile Modulus, 10 mm/min 18700 kgf/cm2 SABIC - Japan Method
    Flexural Stress, yld, 1.3 mm/min, 50 mm span 710 kgf/cm2 ASTM D 790
    Flexural Stress, brk, 1.3 mm/min, 50 mm span 700 kgf/cm2 ASTM D 790
    Flexural Modulus, 1.3 mm/min, 50 mm span 16900 kgf/cm2 ASTM D 790
    Tensile Stress, yield, 5 mm/min 44 MPa ISO 527
    Tensile Stress, break, 5 mm/min 43 MPa ISO 527
    Tensile Stress, yield, 50 mm/min 47 MPa ISO 527
    Tensile Stress, break, 50 mm/min 43 MPa ISO 527
    Tensile Strain, yield, 5 mm/min 4.1 % ISO 527
    Tensile Strain, break, 5 mm/min 106.8 % ISO 527
    Tensile Strain, yield, 50 mm/min 4.6 % ISO 527
    Tensile Strain, break, 50 mm/min 115.3 % ISO 527
    Tensile Modulus, 1 mm/min 1790 MPa ISO 527
    Flexural Stress, yield, 2 mm/min 71 MPa ISO 178
    Flexural Modulus, 2 mm/min 1860 MPa ISO 178
    IMPACT Value Unit Standard
    Izod Impact, notched, 23°C 73 cm-kgf/cm ASTM D 256
    Izod Impact, notched, 0°C 70 cm-kgf/cm ASTM D 256
    Izod Impact, notched, -10°C 67 cm-kgf/cm ASTM D 256
    Izod Impact, notched, -20°C 70 cm-kgf/cm ASTM D 256
    Izod Impact, notched, -30°C 65 cm-kgf/cm ASTM D 256
    Izod Impact, notched, -40°C 60 cm-kgf/cm ASTM D 256
    Instrumented Impact Energy @ peak, 23°C 456 cm-kgf ASTM D 3763
    Instrumented Impact, Energy @ peak, -20°C 420 cm-kgf ASTM D 3763
    Instrumented Impact Energy @ peak, -30 504 cm-kgf ASTM D 3763
    Instrumented Impact Energy @ peak, -40°C 504 cm-kgf ASTM D 3763
    Instrumented Impact Total Energy, 23°C 550 cm-kgf ASTM D 3763
    Instrumented Impact Total Energy, -20°C 542 cm-kgf ASTM D 3763
    Instrumented Impact Total Energy, -30°C 631 cm-kgf ASTM D 3763
    Instrumented Impact Total Energy, -40°C 603 cm-kgf ASTM D 3763
    Izod Impact, notched 80*10*4 +23°C 55 kJ/m2 ISO 180/1A
    Izod Impact, notched 80*10*4 0°C 55 kJ/m2 ISO 180/1A
    Izod Impact, notched 80*10*4 -10°C 52 kJ/m2 ISO 180/1A
    Izod Impact, notched 80*10*4 -20°C 50 kJ/m2 ISO 180/1A
    Izod Impact, notched 80*10*4 -30°C 48 kJ/m2 ISO 180/1A
    Izod Impact, notched 80*10*4 -40°C 46 kJ/m2 ISO 180/1A
    Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm 55 kJ/m2 ISO 179/1eA
    Charpy -30°C, V-notch Edgew 80*10*4 sp=62mm 47 kJ/m2 ISO 179/1eA
    THERMAL Value Unit Standard
    Vicat Softening Temp, Rate B/50 119 °C ASTM D 1525
    HDT, 0.45 MPa, 3.2 mm, unannealed 108 °C ASTM D 648
    HDT, 1.82 MPa, 3.2mm, unannealed 83 °C ASTM D 648
    HDT, 0.45 MPa, 6.4 mm, unannealed 117 °C ASTM D 648
    HDT, 1.82 MPa, 6.4 mm, unannealed 95 °C ASTM D 648
    CTE, -40°C to 95°C, flow 9.75E-05 1/°C ASTM E 831
    CTE, -40°C to 95°C, xflow 1.E-04 1/°C ASTM E 831
    CTE, -30°C to 80°C, flow 9.75E-05 1/°C ISO 11359-2
    CTE, -30°C to 80°C, xflow 1.E-04 1/°C ISO 11359-2
    Vicat Softening Temp, Rate B/50 119 °C ISO 306
    Vicat Softening Temp, Rate B/120 122 °C ISO 306
    HDT/Bf, 0.45 MPa Flatw 80*10*4 sp=64mm 109 °C ISO 75/Bf
    HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm 87 °C ISO 75/Af
    PHYSICAL Value Unit Standard
    Specific Gravity 1.17 - ASTM D 792
    Specific Volume 0.85 cm3/g ASTM D 792
    Density 1.17 g/cm3 ASTM D 792
    Mold Shrinkage, flow, 3.2 mm (5) 1 - 1.2 % SABIC Method
    Melt Flow Rate, 250°C/2.16 kgf 3.8 g/10 min ASTM D 1238
    Melt Flow Rate, 250°C/5.0 kgf 11.4 g/10 min ASTM D 1238
    Melt Flow Rate, 265°C/2.16kgf 6 g/10 min ASTM D 1238
    Melt Flow Rate, 266°C/5.0 kgf 19.7 g/10 min ASTM D 1238
    Density 1.17 g/cm3 ISO 1183
    Water Absorption, (23°C/sat) 0.28 % ISO 62
    Moisture Absorption (23°C / 50% RH) 0.08 % ISO 62
    Melt Flow Rate, 250°C/2.16 kg 3 g/10 min ISO 1133
    Melt Flow Rate, 250°C/5.0 kg 11 g/10 min ISO 1133
    Melt Volume Rate, MVR at 250°C/2.16 kg 3 cm3/10 min ISO 1133
    Melt Volume Rate, MVR at 250°C/5.0 kg 10 cm3/10 min ISO 1133
    Melt Volume Rate, MVR at 265°C/2.16 kg 6 cm3/10 min ISO 1133
    Melt Volume Rate, MVR at 265°C/5.0 kg 18 cm3/10 min ISO 1133
    Source GMD, last updated:2007/07/31
    Processing

    Parameter
    Injection Molding Value Unit
    Drying Temperature 110 °C
    Drying Time 4 - 6 hrs
    Drying Time (Cumulative) 8 hrs
    Maximum Moisture Content 0.02 %
    Melt Temperature 260 - 275 °C
    Nozzle Temperature 255 - 270 °C
    Front - Zone 3 Temperature 255 - 275 °C
    Middle - Zone 2 Temperature 250 - 270 °C
    Rear - Zone 1 Temperature 245 - 265 °C
    Mold Temperature 65 - 90 °C
    Back Pressure 0.3 - 0.7 MPa
    Screw Speed 50 - 80 rpm
    Shot to Cylinder Size 50 - 80 %
    Vent Depth 0.013 - 0.02 mm
    Source GMD, last updated:2007/07/31
     
    THESE PROPERTY VALUES ARE NOT INTENDED FOR SPECIFICATION PURPOSES.
     
    PLEASE CONTACT US FOR AVAILABILITY IN YOUR REGION.
    Compare Contact Us
    XENOY? Resin
    Grades Description
    1102 Unreinforced PC/polyester alloy. Excellent low temperatue impact/chemical resistance to automotive fluids. 
    Datasheet 
    Product Data: 
    Auto Data:
    1760T 11% GF impact modified PBT+PC blend, excellent flow for doorhandles 
    Datasheet 
    Product Data: Engineering Design Data 
    Auto Data:
    5220U Unreinforced PBT+PC alloy. Improved retention of mechanical properties under UV. Excellent low temperature/chemical reistance. 
    Datasheet 
    Product Data: Engineering Design Data 
    Auto Data:
    5720U PBT+PC, UV-Stabilizer, High Impact, Impact Modified, UV-Stabilized, 
    Datasheet 
    Product Data: 
    Auto Data:
    6370 30% Glass filled PBT blend, with low warpage characteristics and good ductility. 
    Datasheet 
    Product Data: Engineering Design Data 
    Auto Data:
    CL100 General purpose grade for unpainted exterior automotive applications. 
    Datasheet 
    Product Data: Engineering Design Data 
    Auto Data: Auto Specification
    CL101 PBT+PC, Mold Release, Heat Stabilized, High Impact,
    Datasheet 
    Product Data: Engineering Design Data 
    Auto Data: Auto Specification
    CL500U Good impact and chemical resistance. UV resistent. 
    Datasheet 
    Product Data: Engineering Design Data 
    Auto Data:
    X4820 PBT+PC, Mineral Filler + Fibrillated Network, Impact Modified, Opaque, 
    Datasheet 
    Product Data: 
    Auto Data:
    X4830 PBT+PC, Mineral, Impact Modified, 
    Datasheet 
    Product Data: 
    Auto Data:
    X4850 PBT+PC, Mineral, Impact Modified, 
    Datasheet 
    Product Data: 
    Auto Data:
    X5300WX Unreinforced, opaque PBT+PC alloy. Chemical resistance and good mechanical performance. UV-stabilized. Excellent weatherability. 
    Datasheet 
    Product Data: 
    Auto Data:
    XL1562 Impact modified PBT+PC blend, outstanding chemical resistance, good UV stability and flow properties. 
    Datasheet 
    Product Data: Engineering Design Data 
    Auto Data:
    下一篇： 暫無相關信息！

    轉載請注明：轉載自環球塑化資訊網 http://www.cqzhejia.com/news/
    本文鏈接：http://www.cqzhejia.com/b-shabo/news270046/
    免責聲明：本文"XENOY PC+PBT 5720U 化學抵抗低溫,紫外線穩定."僅代表作者個人觀點，與環球塑化網無關。環球塑化網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡。電話：400-115-2868

    機械手 激光機
    ©2025 環球塑化網 版權所有   技術支持： 環球塑化網     訪問量：539204  管理入口

    收縮

    • 電話咨詢

    • 0769-82558310
    QR code
    關閉
    關閉
    請輸入驗證碼
    免费 无码 国产在线观看AV,日韩AV国语AV,日韩AV无码成人,无码精品日韩AV (function(){ var bp = document.createElement('script'); var curProtocol = window.location.protocol.split(':')[0]; if (curProtocol === 'https') { bp.src = 'https://zz.bdstatic.com/linksubmit/push.js'; } else { bp.src = 'http://push.zhanzhang.baidu.com/push.js'; } var s = document.getElementsByTagName("script")[0]; s.parentNode.insertBefore(bp, s); })();