<menu id="uukow"></menu>
<nav id="uukow"><nav id="uukow"></nav></nav>
<nav id="uukow"><strong id="uukow"></strong></nav>
<nav id="uukow"></nav>
<menu id="uukow"><strong id="uukow"></strong></menu>

  • 東莞市廣豐聯泰塑料有限公司

    專供PC+ABS 沙伯基礎PC 德國拜耳PC+ABS 寶理PPS LCP

    產品分類
    聯系方式
    友情鏈接
    您當前的位置：首頁 » 新聞中心 » 美國沙伯基礎創新塑料 PBT/PC VALOX ? Resin V3900WX
    新聞中心
    美國沙伯基礎創新塑料 PBT/PC VALOX ? Resin V3900WX
    發布時間：2016-04-19        瀏覽次數：421        返回列表

    VALOX ? Resin V3900WX

    		SI | British | Metric | PDF Europe-Africa-Middle East: COMMERCIAL

     
    PBT/PC blend - Unreinforced - Flame Retardant. This is a UV-stabilized grade designed for outdoor enclosure applications requiring UL 746C F1 weatherability performance.
     

    Property
     
    TYPICAL PROPERTIES (1)
    MECHANICAL Value Unit Standard
    Tensile Stress, yld, Type I, 50 mm/min 540 kgf/cm2 ASTM D 638
    Tensile Stress, brk, Type I, 50 mm/min 430 kgf/cm2 ASTM D 638
    Tensile Strain, yld, Type I, 50 mm/min 5 % ASTM D 638
    Tensile Strain, brk, Type I, 50 mm/min 50 % ASTM D 638
    Tensile Modulus, 5 mm/min 22400 kgf/cm2 ASTM D 638
    Flexural Stress, yld, 1.3 mm/min, 50 mm span 810 kgf/cm2 ASTM D 790
    Flexural Modulus, 1.3 mm/min, 50 mm span 22400 kgf/cm2 ASTM D 790
    Tensile Stress, yield, 50 mm/min 50 MPa ISO 527
    Tensile Stress, break, 50 mm/min 40 MPa ISO 527
    Tensile Strain, yield, 50 mm/min 4 % ISO 527
    Tensile Strain, break, 50 mm/min >40 % ISO 527
    Tensile Modulus, 1 mm/min 2100 MPa ISO 527
    Flexural Stress, yield, 2 mm/min 75 MPa ISO 178
    Flexural Modulus, 2 mm/min 2100 MPa ISO 178
    IMPACT Value Unit Standard
    Izod Impact, notched, 23°C 81 cm-kgf/cm ASTM D 256
    Izod Impact, notched, -30°C 11 cm-kgf/cm ASTM D 256
    Instrumented Impact Total Energy, 23°C 509 cm-kgf ASTM D 3763
    Izod Impact, notched 80*10*4 +23°C 50 kJ/m2 ISO 180/1A
    Izod Impact, notched 80*10*4 0°C 15 kJ/m2 ISO 180/1A
    Izod Impact, notched 80*10*4 -30°C 10 kJ/m2 ISO 180/1A
    Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm 52 kJ/m2 ISO 179/1eA
    THERMAL Value Unit Standard
    Vicat Softening Temp, Rate B/50 105 °C ASTM D 1525
    HDT, 1.82 MPa, 3.2mm, unannealed 75 °C ASTM D 648
    CTE, -40°C to 40°C, flow 8.84E-05 1/°C ASTM E 831
    CTE, -40°C to 40°C, xflow 8.97E-05 1/°C ASTM E 831
    CTE, -40°C to 40°C, flow 8.84E-05 1/°C ISO 11359-2
    CTE, -40°C to 40°C, xflow 8.97E-05 1/°C ISO 11359-2
    Ball Pressure Test, 125°C +/- 2°C PASSES - IEC 60695-10-2
    Vicat Softening Temp, Rate B/50 122 °C ISO 306
    Vicat Softening Temp, Rate B/120 123 °C ISO 306
    HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm 77 °C ISO 75/Af
    Relative Temp Index, Elec 120 °C UL 746B
    Relative Temp Index, Mech w/impact 120 °C UL 746B
    Relative Temp Index, Mech w/o impact 120 °C UL 746B
    PHYSICAL Value Unit Standard
    Specific Gravity 1.3 - ASTM D 792
    Mold Shrinkage, flow, 3.2 mm (5) 0.7 - 1 % SABIC Method
    Melt Flow Rate, 266°C/5.0 kgf 35 g/10 min ASTM D 1238
    Density 1.3 g/cm3 ISO 1183
    Water Absorption, (23°C/sat) 0.1 % ISO 62
    Moisture Absorption (23°C / 50% RH) 0.03 % ISO 62
    Melt Volume Rate, MVR at 265°C/2.16 kg 11 cm3/10 min ISO 1133
    Melt Viscosity, 260°C, 1500 sec-1 260 Pa-s ISO 11443
    FLAME CHARACTERISTICS Value Unit Standard
    UL Compliant, 94V-0 Flame Class Rating (3)(4) 1.5 mm UL 94 by SABIC-IP
    UL Compliant, 94-5VA Rating (3)(4) 3 mm UL 94 by SABIC-IP
    UL Recognized, 94V-0 Flame Class Rating (3) 1.5 mm UL 94
    UL Recognized, 94-5VA Rating (3) 3 mm UL 94
    Glow Wire Flammability Index 960°C, passes at 1 mm IEC 60695-2-12
    Glow Wire Flammability Index 960°C, passes at, by VDE 3 mm IEC 60695-2-12
    Glow Wire Ignitability Temperature, 1.0 mm 825 °C IEC 60695-2-13
    Glow Wire Ignitability Temperature, 3.0 mm 725 °C IEC 60695-2-13
    UV-light, water exposure/immersion F1 - UL 746C
    Source GMD, last updated:2013/08/08
    Processing

    Parameter
    Injection Molding Value Unit
    Drying Temperature 120 °C
    Drying Time 3 - 4 hrs
    Drying Time (Cumulative) 12 hrs
    Maximum Moisture Content 0.02 %
    Melt Temperature 250 - 265 °C
    Nozzle Temperature 245 - 260 °C
    Front - Zone 3 Temperature 250 - 265 °C
    Middle - Zone 2 Temperature 245 - 260 °C
    Rear - Zone 1 Temperature 240 - 255 °C
    Mold Temperature 65 - 90 °C
    Back Pressure 0.3 - 0.7 MPa
    Screw Speed 50 - 80 rpm
    Shot to Cylinder Size 40 - 80 %
    Vent Depth 0.025 - 0.038 mm
    Source GMD, last updated:2013/08/08
     

    轉載請注明：轉載自環球塑化資訊網 http://www.cqzhejia.com/news/
    本文鏈接：http://www.cqzhejia.com/b-shabo/news269825/
    免責聲明：本文"美國沙伯基礎創新塑料 PBT/PC VALOX ? Resin V3900WX"僅代表作者個人觀點，與環球塑化網無關。環球塑化網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡。電話：400-115-2868

    機械手 激光機
    ©2025 環球塑化網 版權所有   技術支持： 環球塑化網     訪問量：534075  管理入口

    收縮

    • 電話咨詢

    • 0769-82558310
    QR code
    關閉
    關閉
    請輸入驗證碼
    免费 无码 国产在线观看AV,日韩AV国语AV,日韩AV无码成人,无码精品日韩AV (function(){ var bp = document.createElement('script'); var curProtocol = window.location.protocol.split(':')[0]; if (curProtocol === 'https') { bp.src = 'https://zz.bdstatic.com/linksubmit/push.js'; } else { bp.src = 'http://push.zhanzhang.baidu.com/push.js'; } var s = document.getElementsByTagName("script")[0]; s.parentNode.insertBefore(bp, s); })();