美國液氮LNP LUBRICOMP PEEK LCL33E 碳纖維增強材料15%,PTFE潤滑劑 (15%)
美國液氮LNP LUBRICOMP PEEK LCL33 碳纖維增強材料15%,PTFE潤滑劑 (15%)
美國液氮LNP LUBRICOMP PEEK LCL33EXQ 碳纖維增強材料15%,PTFE潤滑劑 (15%)
美國液氮LNP LUBRICOMP PEEK LCL36 碳纖維增強,PTFE潤滑劑,導電
美國液氮LNP LUBRICOMP PEEK LCL36E 碳纖維增強,PTFE潤滑劑,導電
美國液氮LNP LUBRICOMP PEEK LL002 PTFE潤滑劑(10%)
美國液氮LNP LUBRICOMP PEEK LL003 PTFE潤滑劑(15%)
美國液氮LNP LUBRICOMP PEEK LL004 PTFE潤滑劑(20%)
美國液氮LNP LUBRICOMP PEEK LL004C PTFE潤滑劑(20%)
美國液氮LNP LUBRICOMP PEEK LL004E PTFE潤滑劑(20%)
美國液氮LNP LUBRICOMP PEEK LX00430 添加潤滑劑
美國液氮LNP LUBRICOMP PEEK LX82803 添加潤滑劑
美國液氮LNP LUBRICOMP PEEK LX91475 耐熱高335度
美國液氮LNP Stat-Kon* PEEK LX00797C 耐熱高335度
美國液氮LNP Stat-Kon* PEEK LX04420C 碳纖維增強導電
美國液氮LNP THERMOCOMP PEEK LC003E 碳纖維增強材料15%
美國液氮LNP THERMOCOMP PEEK LC004XXP 碳纖維增強20%,導電
美國液氮LNP THERMOCOMP PEEK LC006 碳纖維增強30%,導電
美國液氮LNP THERMOCOMP PEEK LC006EXQ 碳纖維增強30%,導電
美國液氮LNP THERMOCOMP PEEK LC008E 碳纖維增強材料, 40%,導電
美國液氮LNP THERMOCOMP PEEK LC008EXP 碳纖維增強導電
美國液氮LNP THERMOCOMP PEEK LC008EXQ 碳纖維增強材料40%,導電
美國液氮LNP THERMOCOMP PEEK LCF62E 玻璃纖維增強材料30%,碳纖維增強材料10%
美國液氮LNP THERMOCOMP PEEK LF002 玻纖維增強10%
美國液氮LNP THERMOCOMP PEEK LF003 玻纖維增強15%
美國液氮LNP THERMOCOMP PEEK LF004 玻纖維增強20%
美國液氮LNP THERMOCOMP PEEK LF004E 玻纖維增強20%
美國液氮LNP THERMOCOMP PEEK LF005 玻纖維增強25%
美國液氮LNP THERMOCOMP PEEK LF006 玻纖維增強30%
美國液氮LNP THERMOCOMP PEEK LF006E 玻纖維增強30%
美國液氮LNP THERMOCOMP PEEK LF006EL 玻纖維增強30%
美國液氮LNP THERMOCOMP PEEK LF008 玻纖維增強40%
美國液氮LNP THERMOCOMP PEEK LX03447 專有填料耐高溫337度
美國液氮LNP THERMOCOMP PEEK LX08411 碳纖維增強
美國液氮LNP THERMOCOMP PEEK LX97024 玻纖維增強添加PTFE 

LNP?LUBRICOMP? Compound LCL33E

SI

| British

| Metric

| PDF

Americas: COMMERCIAL

Also known as:LNP?LUBRICOMP?Compound LCL-4033 EM

Product reorder name:LCL33E

LNP LUBRICOMP? LCL33E is a compound based on Polyetheretherketone resin containing 15% Carbon Fiber, 15% PTFE. Added features of this material include: Easy Molding, Wear Resistant.

Property

TYPICAL PROPERTIES (1)
MECHANICAL	Value	Unit	Standard
Tensile Stress, break	1830	kgf/cm2	ASTM D 638
Tensile Strain, break	1.7	%	ASTM D 638
Tensile Modulus, 50 mm/min	169400	kgf/cm2	ASTM D 638
Flexural Stress	2710	kgf/cm2	ASTM D 790
Flexural Modulus	132100	kgf/cm2	ASTM D 790
Tensile Stress, break	187	MPa	ISO 527
Tensile Strain, break	1.6	%	ISO 527
Tensile Modulus, 1 mm/min	14700	MPa	ISO 527
Flexural Stress	275	MPa	ISO 178
Flexural Modulus	14700	MPa	ISO 178
IMPACT	Value	Unit	Standard
Izod Impact, unnotched, 23°C	50	cm-kgf/cm	ASTM D 4812
Izod Impact, notched, 23°C	6	cm-kgf/cm	ASTM D 256
Instrumented Impact Energy @ peak, 23°C	89	cm-kgf	ASTM D 3763
Izod Impact, unnotched 80*10*4 +23°C	34	kJ/m2	ISO 180/1U
Izod Impact, notched 80*10*4 +23°C	6	kJ/m2	ISO 180/1A
THERMAL	Value	Unit	Standard
HDT, 1.82 MPa, 3.2mm, unannealed	>298	°C	ASTM D 648
CTE, -40°C to 40°C, flow	2.37E-05	1/°C	ASTM E 831
CTE, -40°C to 40°C, xflow	4.17E-05	1/°C	ASTM E 831
CTE, -40°C to 40°C, flow	2.36E-05	1/°C	ISO 11359-2
CTE, -40°C to 40°C, xflow	4.17E-05	1/°C	ISO 11359-2
HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm	>240	°C	ISO 75/Af
PHYSICAL	Value	Unit	Standard
Density	1.43	g/cm3	ASTM D 792
Moisture Absorption, 50% RH, 24 hrs	0.07	%	ASTM D 570
Mold Shrinkage, flow, 24 hrs (5)	0.1 - 0.3	%	ASTM D 955
Mold Shrinkage, xflow, 24 hrs (5)	0.4 - 0.7	%	ASTM D 955
Mold Shrinkage, flow, 24 hrs (5)	0.1 - 0.3	%	ISO 294
Mold Shrinkage, xflow, 24 hrs (5)	0.3 - 0.7	%	ISO 294
Wear Factor Washer	13	10^-10 in^5-min/ft-lb-hr	ASTM D 3702 Modified
Dynamic COF	0.35	-	ASTM D 3702 Modified
Static COF	0.28	-	ASTM D 3702 Modified
Density	1.43	g/cm3	ISO 1183
Moisture Absorption (23°C / 50% RH)	0.7	%	ISO 62
FLAME CHARACTERISTICS	Value	Unit	Standard
UL Compliant, 94V-0 Flame Class Rating (3)(4)	1.5	mm	UL 94 by SABIC-IP

Source GMD, last updated:2013/12/30

Processing

Parameter
Injection Molding	Value	Unit
Drying Temperature	150	°C
Drying Time	4 - 6	hrs
Front - Zone 3 Temperature	380 - 400	°C
Middle - Zone 2 Temperature	380 - 400	°C
Rear - Zone 1 Temperature	370 - 380	°C
Mold Temperature	175 - 190	°C
Back Pressure	0.3 - 0.7	MPa
Screw Speed	60 - 100	rpm

Source GMD, last updated:2013/12/30