<menu id="uukow"></menu>
<nav id="uukow"><nav id="uukow"></nav></nav>
<nav id="uukow"><strong id="uukow"></strong></nav>
<nav id="uukow"></nav>
<menu id="uukow"><strong id="uukow"></strong></menu>

  • 東莞市奧亞塑膠原料有限公司

    PA尼龍料|PC塑料|PBT|PPS|LCP|POM|PEI|TPU|PES|PSU|氟塑料等等

    站內搜索
     
    新聞中心
    產品分類
    聯系方式
    友情鏈接
    您當前的位置：首頁 » 塑料價格 » PA66美國杜邦79G13L NC010
    PA66美國杜邦79G13L NC010
    點擊圖片查看大圖
    產品/服務： 瀏覽次數：519PA66塑膠原料 
    規 格： 25千克/包 
    品 牌： 美國杜邦 
    單 價： 電議/面議 
    起訂量： 25 千克 
    供貨總量：
    發貨期限： 自買家付款之日起 1 天內發貨
    更新日期： 2020-07-13  有效期至：長期有效
    聯 系 人： 劉華 （先生）
    公司電話：
    即時通訊：    


    «上一個產品     下一個產品»
    產品屬性
     產品型號：  
     產品規格：  25千克/包
     產品品牌：  美國杜邦
    產品優勢
    PA66美國杜邦79G13L NC010：Zytel?79G13L NC010是13％玻璃纖維增強，增韌聚酰胺66樹脂注塑成型。
    詳細信息
     PA66美國杜邦79G13L NC010物性測試數據：
    Rheological properties dry / cond Unit Test Standard  
    Viscosity number 150 / * cm³/g ISO 307, 1157, 1628  
    Moulding shrinkage, parallel 0.4 / * % ISO 294-4, 2577  
    Moulding shrinkage, normal 0.8 / * % ISO 294-4, 2577
    Mechanical properties dry / cond Unit Test Standard  
    Tensile Modulus 5100 / 3700 MPa ISO 527-1/-2  
    Stress at break 118 / 67 MPa ISO 527-1/-2  
    Strain at break 4 / 10 % ISO 527-1/-2  
    Tensile creep modulus     ISO 899-1  
    1h * / 4030 MPa    
    1000h * / 3180 MPa    
    Charpy impact strength     ISO 179/1eU  
    23°C 67 / 59 kJ/m²    
    -30°C 59 / 54 kJ/m²    
    Charpy notched impact strength     ISO 179/1eA  
    23°C 8 / 14 kJ/m²    
    -30°C 6 / 6 kJ/m²    
    Izod notched impact strength     ISO 180/1A  
    23°C 8 / 9 kJ/m²    
    -30°C 6 / 4 kJ/m²    
    Hardness, Rockwell, M-scale 90 / 74 - ISO 2039-2  
    Hardness, Rockwell, R-scale 120 / 110 - ISO 2039-2
    Thermal properties dry / cond Unit Test Standard  
    Melting temperature, 10°C/min 263 / * °C ISO 11357-1/-3  
    Temp. of deflection under load     ISO 75-1/-2  
    1.8 MPa 242 / * °C    
    0.45 MPa 260 / * °C    
    Vicat softening temperature, 50°C/h, 50N 240 / * °C ISO 306  
    Coeff. of linear therm. expansion, parallel 50 / * E-6/K ISO 11359-1/-2  
    Coeff. of linear therm. expansion, normal 130 / * E-6/K ISO 11359-1/-2  
    Thermal conductivity of melt 0.18 W/(m K) -  
    Spec. heat capacity of melt 2140 J/(kg K) -  
    RTI, electrical     UL 746B  
    1.5mm 90 / * °C    
    3mm 90 °C    
    RTI, impact     UL 746B  
    1.5mm 65 / * °C    
    3mm 65 °C    
    RTI, strength     UL 746B  
    1.5mm 90 / * °C    
    3mm 90 °C
     
    Flammability dry / cond Unit Test Standard  
    Burning Behav. at 1.5mm nom. thickn. HB / * class IEC 60695-11-10  
    Thickness tested 1.5 / * mm IEC 60695-11-10  
    UL recognition UL / * - -  
    Burning Behav. at thickness h HB / * class IEC 60695-11-10  
    Thickness tested 0.8 / * mm IEC 60695-11-10  
    UL recognition
    Electrical properties dry / cond Unit Test Standard  
    Relative permittivity     IEC 60250  
    100Hz 3.9 / 9.8 -    
    1MHz 3.7 / 4.5 -    
    Dissipation factor     IEC 60250  
    100Hz 65 / 2500 E-4    
    1MHz 130 / 660 E-4    
    Volume resistivity - / 1E12 Ohm*m IEC 60093  
    Surface resistivity * / 1E14 Ohm IEC 60093  
    Electric strength 37 / 35 kV/mm IEC 60243-1  
    Comparative tracking index 475 / - - IEC 60112  
    Other properties dry / cond Unit Test Standard  
    Humidity absorption, 2mm 2.2 / * % Sim. to ISO 62  
    Water absorption, 2mm 6.5 / * % Sim. to ISO 62  
    Density 1210 / - kg/m³ ISO 1183  
    Density of melt 1030 kg/m³ -  
    VDA Properties Value Unit Test Standard  
    Burning rate, Thickness 1 mm 19 mm/min ISO 3795 (FMVSS 302)  
    Emission of organic compounds 7.8 µgC/g VDA 277  
    Odour 4 class VDA 270  
    Chemical Media Resistance
    Acids
    Acetic Acid (5% by mass) (23°C)
    Citric Acid solution (10% by mass) (23°C)
    Lactic Acid (10% by mass) (23°C)
    Hydrochloric Acid (36% by mass) (23°C)
    Nitric Acid (40% by mass) (23°C)
    Sulfuric Acid (38% by mass) (23°C)
    Sulfuric Acid (5% by mass) (23°C)
    Chromic Acid solution (40% by mass) (23°C)
    Bases
    Sodium Hydroxide solution (35% by mass) (23°C)
    Sodium Hydroxide solution (1% by mass) (23°C)
    Ammonium Hydroxide solution (10% by mass) (23°C)
    Alcohols
    Isopropyl alcohol (23°C)
    Methanol (23°C)
    Ethanol (23°C)
    Hydrocarbons
    n-Hexane (23°C)
    Toluene (23°C)
    iso-Octane (23°C)
    Ketones
    Acetone (23°C)
    Ethers
    Diethyl ether (23°C)
    Mineral oils
    SAE 10W40 multigrade motor oil (23°C)
    SAE 10W40 multigrade motor oil (130°C)
    SAE 80/90 hypoid-gear oil (130°C)
    Insulating Oil (23°C)
    Standard Fuels
    ISO 1817 Liquid 1 - E5 (60°C)
    ISO 1817 Liquid 2 - M15E4 (60°C)
    ISO 1817 Liquid 3 - M3E7 (60°C)
    ISO 1817 Liquid 4 - M15 (60°C)
    Standard fuel without alcohol (pref. ISO 1817 Liquid C) (23°C)
    Standard fuel with alcohol (pref. ISO 1817 Liquid 4) (23°C)
    Diesel fuel (pref. ISO 1817 Liquid F) (23°C)
    Diesel fuel (pref. ISO 1817 Liquid F) (90°C)
    Diesel fuel (pref. ISO 1817 Liquid F) (>90°C)
    Salt solutions
    Sodium Chloride solution (10% by mass) (23°C)
    Sodium Hypochlorite solution (10% by mass) (23°C)
    Sodium Carbonate solution (20% by mass) (23°C)
    Sodium Carbonate solution (2% by mass) (23°C)
    Zinc Chloride solution (50% by mass) (23°C)
    Other
    Ethyl Acetate (23°C)
    Hydrogen peroxide (23°C)
    DOT No. 4 Brake fluid (130°C)
    Ethylene Glycol (50% by mass) in water (108°C)
    1% nonylphenoxy-polyethyleneoxy ethanol in water (23°C)
    50% Oleic acid + 50% Olive Oil (23°C)
    Water (23°C)
    Water (90°C)
    Phenol solution (5% by mass) (23°C)


    Symbols used:
    possibly resistant
    Defined as: Supplier has sufficient indication that contact with chemical can be potentially accepted under the intended use conditions and expected service life. Criteria for assessment have to be indicated (e.g. surface aspect, volume change, property change).


    not recommended - see explanation
    Defined as: Not recommended for general use. However, short-term exposure under certain restricted conditions could be acceptable (e.g. fast cleaning with thorough rinsing, spills, wiping, vapor exposure).
    Processing Texts
    Injection molding
    PREPROCESSING

    Drying recommended = Yes, if moisture content of resin exceeds recommended level
    Drying temperature = 80°C
    Drying time, dehumidified dryer = 2-4 h
    Processing moisture content = <0.2 %

    PROCESSING

    Melt temperature optimum = 295°C
    Melt temperature range = 285-305°C
    Mould temperature optimum = 60°C
    Mould temperature range = 50-100°C
    Maximum Screw tangential Speed : 0.3 m/s
    Flow front speed : 150 mm/s
    Hold pressure optimum : 85 MPa
    Hold pressure range : 50-100 MPa
    Back pressure : low
    Hold pressure time : 2.5 s/mm
    Maximum hold-up time : 15 min
    相關產品
    共0條  相關評論
     免責聲明：（1）以上所展示的信息由企業自行提供，內容的真實性、準確性和合法性由發布企業負責，環球塑化網對此不承擔任何保證責任。我們原則上建議您優先選擇“塑企通”會員合作! （2）同時我們鄭重提醒各位買/賣家，交易前請?jiān)敿?xì)核實對方身份，切勿隨意打款或發貨，謹防上當受騙。如發現虛假信息，請向環球塑化網舉報。
    PC塑膠原料 TPU塑膠原料 ASA塑膠原料 TPV塑膠原料 TPEE塑膠原料 PA66塑膠原料代理商 PA66塑膠原料代理商 CAB塑膠原料供應商 PA6T塑膠原料 PES塑膠原料
    ©2025 環球塑化網 版權所有   技術支持： 環球塑化網     訪問量：1132353  管理入口

    收縮

    • 電話咨詢

    • 0769-87120762
    QR code
    關閉
    關閉
    請輸入驗證碼
    免费 无码 国产在线观看AV,日韩AV国语AV,日韩AV无码成人,无码精品日韩AV (function(){ var bp = document.createElement('script'); var curProtocol = window.location.protocol.split(':')[0]; if (curProtocol === 'https') { bp.src = 'https://zz.bdstatic.com/linksubmit/push.js'; } else { bp.src = 'http://push.zhanzhang.baidu.com/push.js'; } var s = document.getElementsByTagName("script")[0]; s.parentNode.insertBefore(bp, s); })();